LK Longines watchmaking traditional Compaq series men’s wristwatch, one of the most elegant and simple styles in Longines, has played pictures in kind. The diameter is 40 mm, and the first watch is not repeated. Like the original, it uses 2892A2 as the basic movement to customize the L619.2 movement, which is mainly sold Point: 1, literal: the overall feeling has been genuine without deficiency, the literal texture is clear, the color temperature is exactly the same, the word Ding and LOGO position just correspond, and the size and specifications are almost the same. Three Arabic numerals and scales are full of stereoscopic impression, and the details are handled properly.
Movement and inner cover: like the original, L619.2 movement is customized with 2892A2 as the basic movement. Geneva pattern and fish scale pattern cover everything, and the same titanium coating is radiation-resistant inner cover. Enlarging the movement by 20 times, although the layout of the movement parts is slightly different, the Geneva grain and twill are not inferior to the original, but the steel seal under the balance wheel is clearer than the original.
Shell type specification: The ring mouth, Batty, shell including raw ears are all opened separately to ensure that the lines, chamfers and radians are consistent with the original ones. CNC machining+numerical control adjustment+vacuum plating. Thickness of 40mm and thickness of 10.6mm are exactly the same as the original ones.
Mirror and handle: Imported sapphire mirror with high transparency, even in the case of reflection, the literal content will not be refracted or discolored. Opening the die separately ensures that the groove and the number of teeth are exactly the same as the original one.
Rear cover: The width and thickness of the bottom cover are almost the same as the thickness of the yarn pattern. The LOGO of Longines on the inner side of the bottom cover is the same. In the picture, the original part was scratched because of mold opening. Corrosion font size is a little smaller, but not obvious.
Strap: Imitate the original classic H+ square design vividly, CNC numerical control+hand polishing, the cost is not less than the original, the single grain size is exactly the same, and the texture and comfort are just right.
Buckle: Butterfly double-press four-axis buckle, which is common with original, made of pure hand steel, with high toughness and long service life, and slightly different in corrosion font size.
LK Longines watchmaking traditional Compaq series men’s wristwatch, one of the most elegant and simple styles in Longines, has played pictures in kind. The diameter is 40 mm, and the first watch is not repeated. Like the original, it uses 2892A2 as the basic movement to customize the L619.2 movement, which is mainly sold Point: 1, literal: the overall feeling has been genuine without deficiency, the literal texture is clear, the color temperature is exactly the same, the word Ding and LOGO position just correspond, and the size and specifications are almost the same. Three Arabic numerals and scales are full of stereoscopic impression, and the details are handled properly.
Movement and inner cover: like the original, L619.2 movement is customized with 2892A2 as the basic movement. Geneva pattern and fish scale pattern cover everything, and the same titanium coating is radiation-resistant inner cover. Enlarging the movement by 20 times, although the layout of the movement parts is slightly different, the Geneva grain and twill are not inferior to the original, but the steel seal under the balance wheel is clearer than the original.
Shell type specification: The ring mouth, Batty, shell including raw ears are all opened separately to ensure that the lines, chamfers and radians are consistent with the original ones. CNC machining+numerical control adjustment+vacuum plating. Thickness of 40mm and thickness of 10.6mm are exactly the same as the original ones.
Mirror and handle: Imported sapphire mirror with high transparency, even in the case of reflection, the literal content will not be refracted or discolored. Opening the die separately ensures that the groove and the number of teeth are exactly the same as the original one.
Rear cover: The width and thickness of the bottom cover are almost the same as the thickness of the yarn pattern. The LOGO of Longines on the inner side of the bottom cover is the same. In the picture, the original part was scratched because of mold opening. Corrosion font size is a little smaller, but not obvious.
Strap: Imitate the original classic H+ square design vividly, CNC numerical control+hand polishing, the cost is not less than the original, the single grain size is exactly the same, and the texture and comfort are just right.
Buckle: Butterfly double-press four-axis buckle, which is common with original, made of pure hand steel, with high toughness and long service life, and slightly different in corrosion font size.
LK Longines watchmaking traditional Compaq series men’s wristwatch, one of the most elegant and simple styles in Longines, has played pictures in kind. The diameter is 40 mm, and the first watch is not repeated. Like the original, it uses 2892A2 as the basic movement to customize the L619.2 movement, which is mainly sold Point: 1, literal: the overall feeling has been genuine without deficiency, the literal texture is clear, the color temperature is exactly the same, the word Ding and LOGO position just correspond, and the size and specifications are almost the same. Three Arabic numerals and scales are full of stereoscopic impression, and the details are handled properly.
Movement and inner cover: like the original, L619.2 movement is customized with 2892A2 as the basic movement. Geneva pattern and fish scale pattern cover everything, and the same titanium coating is radiation-resistant inner cover. Enlarging the movement by 20 times, although the layout of the movement parts is slightly different, the Geneva grain and twill are not inferior to the original, but the steel seal under the balance wheel is clearer than the original.
Shell type specification: The ring mouth, Batty, shell including raw ears are all opened separately to ensure that the lines, chamfers and radians are consistent with the original ones. CNC machining+numerical control adjustment+vacuum plating. Thickness of 40mm and thickness of 10.6mm are exactly the same as the original ones.
Mirror and handle: Imported sapphire mirror with high transparency, even in the case of reflection, the literal content will not be refracted or discolored. Opening the die separately ensures that the groove and the number of teeth are exactly the same as the original one.
Rear cover: The width and thickness of the bottom cover are almost the same as the thickness of the yarn pattern. The LOGO of Longines on the inner side of the bottom cover is the same. In the picture, the original part was scratched because of mold opening. Corrosion font size is a little smaller, but not obvious.
Strap: Imitate the original classic H+ square design vividly, CNC numerical control+hand polishing, the cost is not less than the original, the single grain size is exactly the same, and the texture and comfort are just right.
Buckle: Butterfly double-press four-axis buckle, which is common with original, made of pure hand steel, with high toughness and long service life, and slightly different in corrosion font size.
LK Longines watchmaking traditional Compaq series men’s wristwatch, one of the most elegant and simple styles in Longines, has played pictures in kind. The diameter is 40 mm, and the first watch is not repeated. Like the original, it uses 2892A2 as the basic movement to customize the L619.2 movement, which is mainly sold Point: 1, literal: the overall feeling has been genuine without deficiency, the literal texture is clear, the color temperature is exactly the same, the word Ding and LOGO position just correspond, and the size and specifications are almost the same. Three Arabic numerals and scales are full of stereoscopic impression, and the details are handled properly.
Movement and inner cover: like the original, L619.2 movement is customized with 2892A2 as the basic movement. Geneva pattern and fish scale pattern cover everything, and the same titanium coating is radiation-resistant inner cover. Enlarging the movement by 20 times, although the layout of the movement parts is slightly different, the Geneva grain and twill are not inferior to the original, but the steel seal under the balance wheel is clearer than the original.
Shell type specification: The ring mouth, Batty, shell including raw ears are all opened separately to ensure that the lines, chamfers and radians are consistent with the original ones. CNC machining+numerical control adjustment+vacuum plating. Thickness of 40mm and thickness of 10.6mm are exactly the same as the original ones.
Mirror and handle: Imported sapphire mirror with high transparency, even in the case of reflection, the literal content will not be refracted or discolored. Opening the die separately ensures that the groove and the number of teeth are exactly the same as the original one.
Rear cover: The width and thickness of the bottom cover are almost the same as the thickness of the yarn pattern. The LOGO of Longines on the inner side of the bottom cover is the same. In the picture, the original part was scratched because of mold opening. Corrosion font size is a little smaller, but not obvious.
Strap: Imitate the original classic H+ square design vividly, CNC numerical control+hand polishing, the cost is not less than the original, the single grain size is exactly the same, and the texture and comfort are just right.
Buckle: Butterfly double-press four-axis buckle, which is common with original, made of pure hand steel, with high toughness and long service life, and slightly different in corrosion font size.
LK Longines watchmaking traditional Compaq series men’s wristwatch, one of the most elegant and simple styles in Longines, has played pictures in kind. The diameter is 40 mm, and the first watch is not repeated. Like the original, it uses 2892A2 as the basic movement to customize the L619.2 movement, which is mainly sold Point: 1, literal: the overall feeling has been genuine without deficiency, the literal texture is clear, the color temperature is exactly the same, the word Ding and LOGO position just correspond, and the size and specifications are almost the same. Three Arabic numerals and scales are full of stereoscopic impression, and the details are handled properly.
Movement and inner cover: like the original, L619.2 movement is customized with 2892A2 as the basic movement. Geneva pattern and fish scale pattern cover everything, and the same titanium coating is radiation-resistant inner cover. Enlarging the movement by 20 times, although the layout of the movement parts is slightly different, the Geneva grain and twill are not inferior to the original, but the steel seal under the balance wheel is clearer than the original.
Shell type specification: The ring mouth, Batty, shell including raw ears are all opened separately to ensure that the lines, chamfers and radians are consistent with the original ones. CNC machining+numerical control adjustment+vacuum plating. Thickness of 40mm and thickness of 10.6mm are exactly the same as the original ones.
Mirror and handle: Imported sapphire mirror with high transparency, even in the case of reflection, the literal content will not be refracted or discolored. Opening the die separately ensures that the groove and the number of teeth are exactly the same as the original one.
Rear cover: The width and thickness of the bottom cover are almost the same as the thickness of the yarn pattern. The LOGO of Longines on the inner side of the bottom cover is the same. In the picture, the original part was scratched because of mold opening. Corrosion font size is a little smaller, but not obvious.
Strap: Imitate the original classic H+ square design vividly, CNC numerical control+hand polishing, the cost is not less than the original, the single grain size is exactly the same, and the texture and comfort are just right.
Buckle: Butterfly double-press four-axis buckle, which is common with original, made of pure hand steel, with high toughness and long service life, and slightly different in corrosion font size.
LK Longines watchmaking traditional Compaq series men’s wristwatch, one of the most elegant and simple styles in Longines, has played pictures in kind. The diameter is 40 mm, and the first watch is not repeated. Like the original, it uses 2892A2 as the basic movement to customize the L619.2 movement, which is mainly sold Point: 1, literal: the overall feeling has been genuine without deficiency, the literal texture is clear, the color temperature is exactly the same, the word Ding and LOGO position just correspond, and the size and specifications are almost the same. Three Arabic numerals and scales are full of stereoscopic impression, and the details are handled properly.
Movement and inner cover: like the original, L619.2 movement is customized with 2892A2 as the basic movement. Geneva pattern and fish scale pattern cover everything, and the same titanium coating is radiation-resistant inner cover. Enlarging the movement by 20 times, although the layout of the movement parts is slightly different, the Geneva grain and twill are not inferior to the original, but the steel seal under the balance wheel is clearer than the original.
Shell type specification: The ring mouth, Batty, shell including raw ears are all opened separately to ensure that the lines, chamfers and radians are consistent with the original ones. CNC machining+numerical control adjustment+vacuum plating. Thickness of 40mm and thickness of 10.6mm are exactly the same as the original ones.
Mirror and handle: Imported sapphire mirror with high transparency, even in the case of reflection, the literal content will not be refracted or discolored. Opening the die separately ensures that the groove and the number of teeth are exactly the same as the original one.
Rear cover: The width and thickness of the bottom cover are almost the same as the thickness of the yarn pattern. The LOGO of Longines on the inner side of the bottom cover is the same. In the picture, the original part was scratched because of mold opening. Corrosion font size is a little smaller, but not obvious.
Strap: Imitate the original classic H+ square design vividly, CNC numerical control+hand polishing, the cost is not less than the original, the single grain size is exactly the same, and the texture and comfort are just right.
Buckle: Butterfly double-press four-axis buckle, which is common with original, made of pure hand steel, with high toughness and long service life, and slightly different in corrosion font size.
MT- Longines Kangkas diving series V4 version [the highest version in the market] is equipped with imported zero-repair 9015 high-frequency mechanical movement, the shell belt is forged with 316 fine steel material, manually adjustable ring, anti-glare sapphire crystal glass, screw rotating crown, truly diving watch, super luminous, original mold-opening steel belt buckle, diameter 41mm, Longines LOGO and number are engraved on the top and bottom;
MT Factory-Longines Kangkas diving series V4 version, equipped with imported zero-repair 9015 high-frequency mechanical movement, the shell belt is forged with 316 fine steel material, manually adjustable ring, anti-glare
MT Factory-Longines Kangkas diving series V4 version, equipped with imported zero-repair 9015 high-frequency mechanical movement, the shell belt is forged with 316 fine steel material, manually adjustable ring, anti-glare
MT Factory-Longines Kangkas diving series V4 version, equipped with imported zero-repair 9015 high-frequency mechanical movement, the shell belt is forged with 316 fine steel material, manually adjustable ring, anti-glare
MT Factory-Longines Kangkas diving series V4 version, equipped with imported zero-repair 9015 high-frequency mechanical movement, the shell belt is forged with 316 fine steel material, manually adjustable ring, anti-glare
MT Factory-Longines Kangkas diving series V4 version, equipped with imported zero-repair 9015 high-frequency mechanical movement, the shell belt is forged with 316 fine steel material, manually adjustable ring, anti-glare
MT Factory-Longines Kangkas series, classic re-presented, fashionable and elegant, simple and generous, each accessory 316 forged in fine steel, brighter and more lasting luster, equipped with Japanese 8215 imports
MT Factory-Longines Kangkas series, classic re-presented, fashionable and elegant, simple and generous, each accessory 316 forged in fine steel, brighter and more lasting luster, equipped with Japanese 8215 imports
MT Factory-Longines Kangkas series, classic re-presented, fashionable and elegant, simple and generous, each accessory 316 forged in fine steel, brighter and more lasting luster, equipped with Japanese 8215 imports
MT Factory-Longines Kangkas series, classic re-presented, fashionable and elegant, simple and generous, each accessory 316 forged in fine steel, brighter and more lasting luster, equipped with Japanese 8215 imports
MT Factory-Longines Kangkas series, classic re-presented, fashionable and elegant, simple and generous, each accessory 316 forged in fine steel, brighter and more lasting luster, equipped with Japanese 8215 imports
AC treads the waves and presents wonderfully —— Longines Kangkas diving series L3.741.4.96.6 wristwatch [Case] 1 data. the wrist watch size is 39X13mm, which is comfortable to wear and fits the wrist! 2 bezel. ACF also uses anodized aluminum which is consistent with the original one. This material is not only stable and firm, but also resistant to wear and corrosion (it can be used in the original one)
The top sapphire crystal glass mirror is coated with double transparent anti-glare anti-reflection film, which makes the glass transparent and clear. [movement] adopts accurate and stable seagull TOP 2824 automatic winding movement. [steel belt] three-plate, 316L fine steel strap with double-fold safety clasp and diving extension device with the same structure as the original one! AC production excels because of its specialty!
AC treads the waves and presents wonderfully —— Longines Kangkas diving series L3.741.4.96.6 wristwatch [Case] 1 data. the wrist watch size is 39X13mm, which is comfortable to wear and fits the wrist! 2 bezel. ACF also uses anodized aluminum which is consistent with the original one. This material is not only stable and firm, but also resistant to wear and corrosion (it can be used in the original one)
The top sapphire crystal glass mirror is coated with double transparent anti-glare anti-reflection film, which makes the glass transparent and clear. [movement] adopts accurate and stable seagull TOP 2824 automatic winding movement. [steel belt] three-plate, 316L fine steel strap with double-fold safety clasp and diving extension device with the same structure as the original one! AC production excels because of its specialty!
King of ZF’s cost performance-Longines Kangkas’s overlord in water, glory comes. Chop waves and go forward bravely. Produced by ZF, it must be a fine product. [Case] The size of the watch is 41X12mm. The 316L fine steel shell is flawless, and the polishing process is superb. Zf continues its meticulous and excellent quality, and sets up a new standard bar in the engraving industry. Ceramic bezel has high quality texture of genuine grade, and the stereoscopic impression of scale and chamfering details are correct. [Steel band] The texture structure of each part of the detachable three-bead fine steel strap is synchronized with the genuine one, and the original ears are customized. The first grain and the genuine one can be used universally and strive for perfection, showing the style of a big factory. [Movement] The original genuine L888.2 core was changed with the TOP 2824 Seagull self-rotating movement, which is widely respected by the replica industry
